fbpx

Class Plastic

Class Plastic – Matte Appearance Water-Based Interior Wall Paint

Product Description

Class Plastic Interior Paintis a first-class, water-based, matt-textured interior paint based on acrylic copolymer binder.
This special formula combines durability and aesthetic appearance.
In addition, thanks to its environmentally friendly structure, it protects user health and does not produce any unpleasant odor during application.
Moreover, it provides simple elegance in modern spaces with its smooth surface.
As a result, it is the ideal choice for professionals looking for a long-lasting matte finish.

Product Features

  • Matte and homogeneous appearance: It does not reflect light and creates a deep and balanced effect on the walls.

  • High covering power: It provides superior covering in a single coat and easily hides surface imperfections.

  • Erasable structure: In daily use, dirt and stains can be easily cleaned with a damp cloth.

  • Easy application: It is applied easily with a roller, brush or spray, and leaves no traces.

  • Breathability: It prevents the risk of swelling and cracking by maintaining the moisture balance of the wall.

  • Long-lasting color retention: It is resistant to UV rays, so colors remain vibrant for years.

  • Environmentally friendly formula: Its water-based structure does not harm nature or human health.

  • High adhesion power: When used with a suitable primer, it provides excellent adhesion to the surface.

Moreover, Class Plastic Interior Paint It renews living spaces by offering both decorative aesthetics and functional protection.

Usage areas

Class Plastic offers a wide range of uses in interior applications.
It shows high performance especially on smooth surfaces.
It can be safely applied on the following surfaces:

  • Old painted walls

  • Concrete, plaster and black plaster

  • Betopan and aerated concrete

  • Glass textiles and paintable wallpapers

It also provides long-lasting solutions in different living spaces such as homes, offices, schools, hospitals and hotels.
for more details Silkcoat Products Page You can check the link.

Technical information

Traits Value
structure Styrene Acrylic
Consumption 13–16 m²/L (single coat) / 90–130 g/m²
Thinner Su
Thinning Ratio 10–15%
Drying Time Touch: 15–20 minutes • Dust Removal: 1 hour • Full Drying: 24 hours
Viscosity (23°C) 125 KU ± 10
pH (25°C) 8–9
Density 1,56 ± 0,02 g/ml
Amount of Solid Matter 67% ± 2
Wet Scrub Resistance Class 2 (TS EN 13300)
Covering Power Class 2 (8 m²/L)
Grain Size Class S1 (Fine)
Brightness Class G3 (Matt)
Dry Film Thickness 30 ± 5 microns
Wet Film Thickness 60 ± 5 microns

Application Instructions

1. Surface Preparation:
The application surface must be completely cleared of dust, dirt and oil.
Any swollen or loose areas should be cleaned by lightly sanding.
In this way, the paint adheres strongly to the surface and forms a smooth film layer.

2. Primer Application:
On new and absorbent surfaces Silkcoat Isolac,
on old or dirty surfaces Silkcoat Universal Primer,
in areas where paste is applied Silkcoat Putty Primer should be preferred.
These steps ensure that Class Plastic spreads more homogeneously and has a longer lifespan.

3. Application:
The product is diluted with 10–15% clean water.
By roller, brush or spray method double should be applied.
Depending on the ambient temperature between floors at least 2 hours should be expected.
Additionally, all tools used should be cleaned with water after the application is completed.

4. Application Conditions:
Ambient temperature during application and drying +5°C to +35°C should be between.
Before starting the painting process on newly plastered surfaces at least 28 days should be expected.
Moreover, sanding on very shiny surfaces increases the adhesion of the paint.

Security and Storage Information

  • S2: Keep out of reach of children.

  • S24/25: Avoid contact with eyes and skin.

  • S46: If swallowed, seek medical advice immediately and show the label.

  • Do not pour the product into sewer.

  • Store in a cool, dry place away from direct sunlight, with the lid closed. 2 Years can be stored.

Also for more security details Silkcoat Safety Guide You can browse the page.

Packaging Options

  • 15 L plastic bucket

  • 7,5 L plastic bucket

  • 2,5 L plastic bucket

Quality certificates

It complies with TS 5808 standard.
Pos. No: Y.25.003/05, Y.25.003/14, Y.25.003/15, Y.25.003/16

FAQ

What is Class Plastic?
It is a first-class water-based interior paint with a matte texture and high covering power.

On which surfaces is it used?
It gives excellent results on surfaces such as concrete, plaster, gypsum, betopan and wallpaper.

Can it be deleted?
Yes, it can be easily cleaned with a damp cloth.

How many layers should be applied?
Two coats are recommended. Wait at least 2 hours between coats.

What is the drying time?
It reaches touch dryness in 15-20 minutes and complete dryness in 24 hours.

What should be the application temperature?
It should be applied at temperatures between +5°C and +35°C.