Fe

Product Description: Hydrocarbon resin based, air drying, fast drying bright top coat.

Features:Silkcoat Fe Paint is resistant to UV rays and long life thanks to the particles in the structure.

It can be used as dipping, it is not necessary to apply primer before top coat application, it has high covering ability, it does not settle in dip applications and it has a high resistance to corrosion.

Application surfaces: Ferforje paint can be easily applied to all surfaces due to the fact that it has especially been designed for metal surfaces used in the production of wrought iron.

Technical Data:

Connector Type: Hydrocarbon Resin

Color: Gold, copper, bronze

Brightness: Bright

Density: 1,00 ± 0,05 g / cm3

Solid matter: 45 ± 0,05% by weight

35% ± 0.05% by volume

VOC (Volatile Organic Compounds): 550 gr / lt

Application type: Spraying, immersion

Application Tineri: Silkcoat Rapid Thinner (SBS-01-HRT)

Heat Resistance: 150 ° C

Application: The application surface should be free from all kinds of dust, dirt and oil. A clean, dry and solid surface should be obtained after lightly smoothing the blistered and old painted surfaces. Each floor is applied in two layers with 20-25μ dry film thickness with brush, roller or paint gun. Wait 10-12 hours between coats. Care must be taken to ensure that the film paint has completely been solid and the temperature should be gradually increased when the system is put into operation.

Warning:

R10 Flammable.

R51 / 53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

R65 Harmful: may cause lung damage if swallowed.

R66 Repeated exposure may cause skin dryness or cracking.

R67 Vapors may cause drowsiness and dizziness.

S2 Keep out of reach of children.

S16 Keep away from sources of ignition – No smoking.

S24 / 25 Avoid contact with eyes and skin.

S37 Wear suitable gloves.

S51 Use only in well-ventilated areas.

S57 Use a suitable container to avoid contamination.

S60 Dispose of this material and its container as hazardous waste.

S61 Avoid release to the environment. Refer to Special Instructions for Use / Safety Data Sheet.

S62 If swallowed, do not induce vomiting. Contact the first aid service immediately and show the container or label.

Storage: It may be stored for one year in unopened original containers in the direct sunlight-free environment at 5-35°C. It must be protected from excessive temperature and humidity.

Packing: 0.25kg, 1kg, 3kg, 15kg.

WhatsApp chat WhatsApp