Silkoten

DESCRIPTION: synthetic alkyd resin based, semi-matt satin topcoat paint.

CHARACTERISTIC : -High covering ability. -Doesn’t turn yellow. -Adhesive to the applied surface. -Easily appliable. -Resistant against physical and chemical impacts. -Easy cleanable and flexible.

APPLICATION SURFACES: Can be used on all kinds of exterior and interior surfaces such as wooden , metal , plaster and similar.

TECHNICAL INFORMATION:

Structure : Silk satin

Consumption: 14 – 18 ( m²/ lt ), 70-100 (g/m2)

Thinning Ratio: % 10 – 15

Recommended Primer: Silkcoat Synthetic Primer, Silkcoat Rustproof.

Application tools: Brush , roller , spray.

Drying: Touch dry 2 – 3 saat; Dust repulsive; after  5 – 36 hours ;  Hard dry ; after 16 – 18 hours.  Leave minimum  24 hours between coats.

Viscosity: 100 KU ± 10  (  23 º C )

Density: 1,31 ± 0,05 ( g / ml )

Amount of solid: 72 ± 2%

Thickness of dry coat: 40 ±  5 micron

Thickness of wet coat: 80 ± 5 micron

SURFACE PREPARATION:

Silkcoat universal primer is first applied to satin plaster and putty corrected surfaces, and Silkcoat Synthetic primer is applied after one day.

All roughnesses are removed with thin emery and Silkcoat Synthetic Primer can be applied once again in case of necessity.

— If it is to apply on wooden surface , Silkcoat Pinoten can be applied after all knots have been burned, and putty is applied if necessary, then Silkcoat Synthetic Primer is applied.

On metal surfaces, after Silkcoat Antirust has been applied , corrections are done depending on desire and Silkcoat Synthetic Primer is applied.

Silkcoat Silkoten is applied on prepared surfaces in two coats leaving one day between the coats.

when the application is made by brush, the product should be thinned with 5% of synthetic tin, when the application is by roller, the product should be thinned with 15% of synthetic tin.

CAUTION: R10 Flammable. R51 / 53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R65 Harmful: may cause lung damage if swallowed. R66 Repeated exposure may cause skin dryness or cracking. R67 Vapors may cause drowsiness and dizziness. S2 Keep out of reach of children. S16 Keep away from sources of ignition – No smoking. S24 / 25 Avoid contact with eyes and skin. S37 Wear suitable gloves. S51 Use only in well-ventilated areas S57 Use a suitable container to avoid contamination.

S60 Dispose of  his material and its container as hazardous waste. S61 Avoid release to the environment. Refer to Special Instructions for Use / Safety Data Sheet. S62 If swallowed, do not induce vomiting. Contact the first aid service immediately and show the container or label.

STORAGE:  Keep  at a cool and clean place away from sun light. İt can be stored  unopened 1 year  at room temperature.

PACKAGING: 15 lt, 2,5 lt Tin Bucke

WhatsApp chat WhatsApp